Beryl Vs Compiz

7 risposte [Ultimo messaggio]
Ritratto di Kispios
Kispios
(Junior)
Offline
Junior
Iscritto: 29/04/2007
Messaggi: 21

Volevo sapere come sostituire il window manager compiz a Beryl i mandriva 2007.1 che ho installato da live con gli effetti grafici già integrati, Beryl l'ho già installato ma non so come dire a compiz di farsi da parte, poi vedrò di farlo partire allo startup.

Grazie dell'aiuto :idea:

Mandriva 2007 & Apache: Accoppiata perfetta????? 8-)

Ritratto di killer1987
killer1987
(Guru)
Offline
Guru
Iscritto: 02/04/2006
Messaggi: 2924

ciao, basta andare su configura il tuo computer->hardware->3d->scegli beryl. poi se vuoi avviare beryl-manager segui il passo 6 (ti conviene farlo)
http://www.mandrakeitalia.org/modules/wfsection/article.php?page=1&articleid=206

ciao
Marcello

Alé Mageia, C'mon Mageia!!! - Wiki Italiano Mandriva - Acer Aspire 5633, intel GMA 950, stamp HP Laserjet 1018, scanner Epson

Ritratto di meskalito
meskalito
(Geek)
Offline
Geek
Iscritto: 27/02/2007
Messaggi: 86

ciao, come posso risolvere il problema che afflige il mio beryl riguardante i contorni delle finestre? c'è qualche pacchetto particolare o bisogna modificare il file xorg?

asus p5k e6420 -3.0- Ghz temp 30°-39°
2gb ram 800mhz 8800gts 364mb
2 sata2 seagate 250gb western digital 500gb 16mb

Ritratto di kio341
kio341
(Guru)
Offline
Guru
Iscritto: 09/09/2004
Messaggi: 591

bisogna modificare xorg.conf
come ?
leggiti la mia guida qui sul sito
http://www.mandrakeitalia.org/modules/wfsection/article.php?articleid=227

Ritratto di meskalito
meskalito
(Geek)
Offline
Geek
Iscritto: 27/02/2007
Messaggi: 86

niente, sia le modifiche che mi consiglia la tua guida che quelle consigliate da quella di moreno mi fanno saltare il server e mi tocca rimettere i driver.punto e capo di nuovo.
Qualche idea? mi manca l'ultimo passo, maledette finestre 8-)

asus p5k e6420 -3.0- Ghz temp 30°-39°
2gb ram 800mhz 8800gts 364mb
2 sata2 seagate 250gb western digital 500gb 16mb

Ritratto di meskalito
meskalito
(Geek)
Offline
Geek
Iscritto: 27/02/2007
Messaggi: 86

ok, come da guida di moreno omettendo solamente queste righe:
Option "DAMAGE" "true"
Option "RENDER" "true"

bah!
Laughing

asus p5k e6420 -3.0- Ghz temp 30°-39°
2gb ram 800mhz 8800gts 364mb
2 sata2 seagate 250gb western digital 500gb 16mb

Ritratto di meskalito
meskalito
(Geek)
Offline
Geek
Iscritto: 27/02/2007
Messaggi: 86

come non detto :-o
se riavvio tutto ok
ma se provo a spegnere e riaccendere........................................
tutto da capo!
c'è un motivo per tutto ciò? che differenza c'è tra il riavvio e spegnere e riaccendere?

asus p5k e6420 -3.0- Ghz temp 30°-39°
2gb ram 800mhz 8800gts 364mb
2 sata2 seagate 250gb western digital 500gb 16mb

Ritratto di Myrdrwin
Myrdrwin
(Junior)
Offline
Junior
Iscritto: 25/03/2007
Messaggi: 39

Io non so che versione hai, anch'io ho avuto il tuo stesso problema con una Mandriva 2007.1 64bit, la mia scheda video è una 7900GS ho messo i driver 9775 installandoli a manina.
Ho seguito la guida di Moreno per la modifica del file xorg.conf, ma non andava a dovere e così l'ho modificata a modo mio usando la sua come canovaccio. Ti posto il mio xorg.conf, soprattutto le librerie glx sono in una posizione diversa rispetto a quella di Moreno.

# File generated by XFdrake (rev 142098)

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection
# File generated by XFdrake (rev 142098)

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Mon Feb 26 23:37:58 PST 2007

# File generated by XFdrake (rev 142098)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1" 0 0
EndSection

Section "Files"
# font server independent of the X server to render fonts.
# minimal fonts to allow X to run without xfs
FontPath "unix/:-1"
FontPath "/usr/share/fonts/misc:unscaled"
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "/usr/lib64/xorg/modules/extension/libglx.so"
# Load "glx" # 3D layer
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)

# allows the server to start up even if the mouse does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
Option "allowmouseopenfail"
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbOptions" "compose:rwin"
EndSection

Section "Monitor"
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
Identifier "monitor1"
VendorName "Generic"
ModelName "Flat Panel 1680x1050"
HorizSync 31.5 - 90.0
VertRefresh 60.0
ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616
ModeLine "1680x1050_120" 313.2 1680 1816 2000 2320 1050 1051 1054 1125 -hsync +vsync
ModeLine "1680x1050_100" 256.2 1680 1808 1992 2304 1050 1051 1054 1112 -hsync +vsync
ModeLine "1680x1050_85" 214.5 1680 1800 1984 2288 1050 1051 1054 1103 -hsync +vsync
ModeLine "1680x1050_75" 188.1 1680 1800 1984 2288 1050 1051 1054 1096 -hsync +vsync
ModeLine "1680x1050_60" 147.1 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync
ModeLine "1680x1050_50" 120.2 1680 1776 1952 2224 1050 1051 1054 1081 -hsync +vsync
ModeLine "1600x1000_120" 284.0 1600 1728 1904 2208 1000 1001 1004 1072 -hsync +vsync
ModeLine "1600x1000_100" 232.1 1600 1720 1896 2192 1000 1001 1004 1059 -hsync +vsync
ModeLine "1600x1000_85" 194.2 1600 1712 1888 2176 1000 1001 1004 1050 -hsync +vsync
ModeLine "1600x1000_75" 169.1 1600 1704 1880 2160 1000 1001 1004 1044 -hsync +vsync
ModeLine "1600x1000_60" 133.1 1600 1704 1872 2144 1000 1001 1004 1035 -hsync +vsync
ModeLine "1600x1000_50" 108.7 1600 1688 1856 2112 1000 1001 1004 1029 -hsync +vsync
ModeLine "1440x900_120" 229.8 1440 1552 1712 1984 900 901 904 965 -hsync +vsync
ModeLine "1440x900_100" 187.6 1440 1544 1704 1968 900 901 904 953 -hsync +vsync
ModeLine "1440x900_85" 156.8 1440 1536 1696 1952 900 901 904 945 -hsync +vsync
ModeLine "1440x900_75" 136.5 1440 1536 1688 1936 900 901 904 940 -hsync +vsync
ModeLine "1440x900_60" 106.5 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
ModeLine "1440x900_50" 87.4 1440 1512 1664 1888 900 901 904 926 -hsync +vsync
ModeLine "1280x800_120" 181.2 1280 1376 1520 1760 800 801 804 858 -hsync +vsync
ModeLine "1280x800_100" 147.9 1280 1376 1512 1744 800 801 804 848 -hsync +vsync
ModeLine "1280x800_85" 123.4 1280 1368 1504 1728 800 801 804 840 -hsync +vsync
ModeLine "1280x800_75" 107.2 1280 1360 1496 1712 800 801 804 835 -hsync +vsync
ModeLine "1280x800_60" 83.5 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
ModeLine "1280x800_50" 68.6 1280 1336 1472 1664 800 801 804 824 -hsync +vsync
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce FX - GeForce 7950"
Driver "nvidia"
Option "DPMS"
Option "AddARGBGLXVisuals" "true"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
EndSubsection

Subsection "Display"
Depth 15
Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
EndSubsection

Subsection "Display"
Depth 16
Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
EndSubsection

Subsection "Display"
Depth 24
Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
EndSubsection
Option "DPMS"
EndSection

Section "Extensions"
Option "Composite"
EndSection