Finalmente SUCCEDE QUALCOSA . Ecco un resoconto: ho copiato i tre file dei links indicati in /lib/firmware; poi ho agganciato la Pinnacle , ho aspettato qualche minuto e ho avviato Kaffeine; ho resettato il dispositivo , scelto la "scansione automatica", e in tutta la scansione mi ha tirato fuori una manciata di canali sconosciuti (7NEWS-TVISION, A3NEWS-TVISION,A3-TVISION...)in tutto 7.Bene, dico, ne guardo uno, si vede (non benissimo) e si sente. Poi passo ad un altro e Kaffeine scompare...Avvio vlc, scelgo dispositivo dvb dalle opzioni, parte la scansione ma non trova alcun canale . Riavvio il sistema e ritorno su Kaffeine, scelgo "Scansione automatica Italia", mi trova in tutto altri 13 canali tutti che iniziano con TV7...ne guardo uno, si vede meglio che prima, poi passo ad un'altro non si vede + nulla, neancche tornando al precedente, e finalmente emerge un laconico "Spiacente Errore leggendo da". Pare che siamo vicini e che sia proprio una questione di firmware o di configurazione dello stesso sul dispositivo giusto.Non ho provato la pennetta Terratec, ora mi preme postarvi il responso di dmesg ( intanto grazie ), eccovelo:

[xxxxxxxx@localhost ~]$ su -
Password:
[root@localhost ~]# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.7-desktop-1mnb2 (thomas@celeste.mandriva.com) (gcc version 4.6.0 20110513 (prerelease) (GCC) ) #1 SMP Sun May 22 19:38:58 UTC 2011
Command line: BOOT_IMAGE=linux root=UUID=728cafc5-59fc-4aab-8e5d-93f09287ac97 nokmsboot logo.nologo quiet lapic resume=UUID=949db695-e90e-452e-8166-3d499e8450b4 splash=silent vga=788
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: System manufacturer System Product Name/M2N-E, BIOS ASUS M2N-E ACPI BIOS Revision 1102 09/21/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFE0000000 write-back
3 base 00DFF00000 mask FFFFF00000 uncachable
4 base 0100000000 mask FFE0000000 write-back
5 disabled
6 disabled
7 disabled
TOM2: 0000000120000000 aka 4608M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f5980] f5980
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000dfee0000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfee0000 page 4k
kernel direct mapping tables up to dfee0000 @ 1fffa000-20000000
init_memory_mapping: 0000000100000000-0000000120000000
0100000000 - 0120000000 page 2M
kernel direct mapping tables up to 120000000 @ dfeda000-dfee0000
RAMDISK: 36257000 - 37ff0000
ACPI: RSDP 00000000000f7720 00024 (v02 Nvidia)
ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 00000000dfeeabc0 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: DSDT 00000000dfee3280 078E1 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000dfee0000 00040
ACPI: SSDT 00000000dfeeadc0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000dfeeb100 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 00000000dfeeb180 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 00000000dfeead00 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Initmem setup node 0 0000000000000000-0000000120000000
NODE_DATA [000000011fffb000 - 000000011fffffff]
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00120000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000dfee0
0: 0x00100000 -> 0x00120000
On node 0 totalpages: 1048175
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 898840 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 129280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfefff000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000
PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8800dfc00000 s82624 r8192 d23872 u1048576
pcpu-alloc: s82624 r8192 d23872 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032041
Policy zone: Normal
Kernel command line: BOOT_IMAGE=linux root=UUID=728cafc5-59fc-4aab-8e5d-93f09287ac97 nokmsboot logo.nologo quiet lapic resume=UUID=949db695-e90e-452e-8166-3d499e8450b4 splash=silent vga=788
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 2580000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ d4000000
PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
Memory: 3961720k/4718592k available (4133k kernel code, 525892k absent, 230980k reserved, 3247k data, 752k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2812.878 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.75 BogoMIPS (lpj=2812878)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 00dff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110112
ftrace: allocating 16358 entries in 65 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
MCE: In-kernel MCE decoding enabled.
Booting Node 0, Processors #1 Ok.
Brought up 2 CPUs
Total of 2 processors activated (11251.38 BogoMIPS).
devtmpfs: initialized
Time: 17:54:23 Date: 10/18/11
NET: Registered protocol family 16
node 0 link 0: io port [9000, ffff]
TOM: 00000000e0000000 aka 3584M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [f4000000, fe02ffff]
node 0 link 0: mmio [f0000000, f02fffff]
TOM2: 0000000120000000 aka 4608M
bus: [00, 02] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xe0000000-0xf3ffffff]
bus: 00 index 3 [mem 0xf4000000-0xffffffff]
bus: 00 index 4 [mem 0x120000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xdff00000-0xfebfffff] (ignored)
pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
pci 0000:00:01.0: [10de:0360] type 0 class 0x000601
pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.2: [10de:036a] type 0 class 0x000500
pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: [10de:036e] type 0 class 0x000101
pci 0000:00:04.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
pci 0000:00:05.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:05.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:05.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:05.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:05.0: reg 20: [io 0xdc00-0xdc0f]
pci 0000:00:05.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
pci 0000:00:05.1: reg 10: [io 0x09e0-0x09e7]
pci 0000:00:05.1: reg 14: [io 0x0be0-0x0be3]
pci 0000:00:05.1: reg 18: [io 0x0960-0x0967]
pci 0000:00:05.1: reg 1c: [io 0x0b60-0x0b63]
pci 0000:00:05.1: reg 20: [io 0xc800-0xc80f]
pci 0000:00:05.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:05.2: [10de:037f] type 0 class 0x000101
pci 0000:00:05.2: reg 10: [io 0xc400-0xc407]
pci 0000:00:05.2: reg 14: [io 0xc000-0xc003]
pci 0000:00:05.2: reg 18: [io 0xbc00-0xbc07]
pci 0000:00:05.2: reg 1c: [io 0xb800-0xb803]
pci 0000:00:05.2: reg 20: [io 0xb400-0xb40f]
pci 0000:00:05.2: reg 24: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
pci 0000:00:08.0: [10de:0373] type 0 class 0x000680
pci 0000:00:08.0: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:08.0: reg 14: [io 0xb000-0xb007]
pci 0000:00:08.0: reg 18: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:08.0: reg 1c: [mem 0xfe028000-0xfe02800f]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: PME# disabled
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:06.0: [1814:0302] type 0 class 0x000280
pci 0000:01:06.0: reg 10: [mem 0xfdef8000-0xfdefffff]
pci 0000:01:08.0: [1412:1712] type 0 class 0x000401
pci 0000:01:08.0: reg 10: [io 0xac00-0xac1f]
pci 0000:01:08.0: reg 14: [io 0xa800-0xa80f]
pci 0000:01:08.0: reg 18: [io 0xa400-0xa40f]
pci 0000:01:08.0: reg 1c: [io 0xa000-0xa03f]
pci 0000:01:08.0: supports D2
pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:06.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0x120000000-0xfcffffffff] (subtractive decode)
pci 0000:02:00.0: [1002:7109] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xfddf0000-0xfddfffff 64bit]
pci 0000:02:00.0: reg 20: [io 0x9c00-0x9cff]
pci 0000:02:00.0: reg 30: [mem 0xfddc0000-0xfdddffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:7129] type 0 class 0x000380
pci 0000:02:00.1: reg 10: [mem 0xfdde0000-0xfddeffff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0f.0: PCI bridge to [bus 02-02]
pci 0000:00:0f.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0f.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff
reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xdff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x1000-0x107f]
pnp 00:01: [io 0x1080-0x10ff]
pnp 00:01: [io 0x1400-0x147f]
pnp 00:01: [io 0x1480-0x14ff]
pnp 00:01: [io 0x1800-0x187f]
pnp 00:01: [io 0x1880-0x18ff]
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1080-0x10ff] has been reserved
system 00:01: [io 0x1400-0x147f] has been reserved
system 00:01: [io 0x1480-0x14ff] has been reserved
system 00:01: [io 0x1800-0x187f] has been reserved
system 00:01: [io 0x1880-0x18ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0044-0x005f]
pnp 00:02: [io 0x0062-0x0063]
pnp 00:02: [io 0x0065-0x006f]
pnp 00:02: [io 0x0074-0x007f]
pnp 00:02: [io 0x0091-0x0093]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0800-0x087f]
pnp 00:02: [io 0x0290-0x0297]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: [io 0x0290-0x0297] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfefff000-0xfefff3ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [irq 7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x000cf600-0x000cffff]
pnp 00:0b: [mem 0x000f0000-0x000f7fff]
pnp 00:0b: [mem 0x000f8000-0x000fbfff]
pnp 00:0b: [mem 0x000fc000-0x000fffff]
pnp 00:0b: [mem 0xfefff000-0xfefff0ff]
pnp 00:0b: [mem 0xdfee0000-0xdfefffff]
pnp 00:0b: [mem 0xffff0000-0xffffffff]
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x00100000-0xdfedffff]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfeefffff]
pnp 00:0b: [mem 0xfefff000-0xfeffffff]
pnp 00:0b: [mem 0xfff80000-0xfff80fff]
pnp 00:0b: [mem 0xfff90000-0xfffbffff]
pnp 00:0b: [mem 0xfffed000-0xfffeffff]
system 00:0b: [mem 0x000cf600-0x000cffff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0xfefff000-0xfefff0ff] has been reserved
system 00:0b: [mem 0xdfee0000-0xdfefffff] could not be reserved
system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0xdfedffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0b: [mem 0xfefff000-0xfeffffff] could not be reserved
system 00:0b: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:0b: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:0b: [mem 0xfffed000-0xfffeffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:06.0: PCI bridge to [bus 01-01]
pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:00:0f.0: PCI bridge to [bus 02-02]
pci 0000:00:0f.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0f.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
pci_bus 0000:00: resource 8 [mem 0x120000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 6 [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
pci_bus 0000:01: resource 8 [mem 0x120000000-0xfcffffffff]
pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered

UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:05.0: Enabling HT MSI Mapping
pci 0000:00:05.1: Enabling HT MSI Mapping
pci 0000:00:05.2: Enabling HT MSI Mapping
pci 0000:00:06.0: Enabling HT MSI Mapping
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30308k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1318960462.803:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7925
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0f.0: setting latency timer to 64
pcieport 0000:00:0f.0: irq 40 for MSI/MSI-X
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 1875k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition UUID=949db695-e90e-452e-8166-3d499e8450b4
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 15:72:947
tty tty4: hash matches
rtc_cmos 00:05: setting system clock to 2011-10-18 17:54:23 UTC (1318960463)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 752k freed
<30>dracut: dracut-010-6
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-cd driver 5.00
<30>udevd[135]: starting version 168
<30>dracut: Starting plymouth daemon
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:08.0: setting latency timer to 64
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
libata version 3.00 loaded.
forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1e:8c:50:17:92
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 ohci_hcd
usb usb1: SerialNumber: 0000:00:02.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 ehci_hcd
usb usb2: SerialNumber: 0000:00:02.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
sata_nv 0000:00:05.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:05.0: Using SWNCQ mode
sata_nv 0000:00:05.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 20
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 20
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.1: Using SWNCQ mode
sata_nv 0000:00:05.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 23
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 23
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 22
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.2: Using SWNCQ mode
sata_nv 0000:00:05.2: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 22
ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 22
pata_amd 0000:00:04.0: version 0.4.1
pata_amd 0000:00:04.0: setting latency timer to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata7: port disabled. ignoring.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100
ata5.00: configured for UDMA/100
ata1.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
ata1.00: 2930277168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
ata3.00: HPA detected: current 625140335, native 625142448
ata3.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata3.00: 625140335 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
usb 1-4: new low speed USB device using ohci_hcd and address 2
ata2: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
usb 1-4: New USB device found, idVendor=145f, idProduct=011a
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: GM-4200 Gamer Optical Mouse
usb 1-4: Manufacturer: Trust
ata4: SATA link down (SStatus 0 SControl 300)
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5
usb 1-5: new low speed USB device using ohci_hcd and address 3
usb 1-5: New USB device found, idVendor=046d, idProduct=c31c
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB Keyboard
usb 1-5: Manufacturer: Logitech
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
ata6.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
ata8: port disabled. ignoring.
sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 2:0:0:0: [sdb] 625140335 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
input: Trust GM-4200 Gamer Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input0
generic-usb 0003:145F:011A.0001: input,hidraw0: USB HID v1.11 Mouse [Trust GM-4200 Gamer Optical Mouse] on usb-0000:00:02.0-4/input0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
usb 1-6: new full speed USB device using ohci_hcd and address 4
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-5/1-5:1.0/input/input1
generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:02.0-5/input0
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 5:0:0:0: Attached scsi CD-ROM sr1
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-5/1-5:1.1/input/input2
generic-usb 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:02.0-5/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sdb: sdb1 sdb4 < sdb5 sdb6 sdb7 sdb8 >
sd 2:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-6: New USB device found, idVendor=046d, idProduct=0910
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6: Product: Camera
usb 1-6: Manufacturer: Logitech
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Marking nosave pages: 00000000dfee0000 - 0000000100000000
PM: Marking nosave pages: 00000000d4000000 - 00000000d8000000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda3): INFO: recovery required on readonly filesystem
EXT4-fs (sda3): write access will be enabled during recovery
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
<30>dracut: Checking filesystems
<30>dracut: fsck -T -t noopts=_netdev -A -a
<30>dracut: /dev/sda3: clean, 260954/3842048 files, 2326191/15360148 blocks
<30>dracut: Remounting /dev/disk/by-uuid/728cafc5-59fc-4aab-8e5d-93f09287ac97 with -o ro,
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
<30>dracut: Mounted root filesystem /dev/sda3
<30>dracut: Switching root
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
<30>systemd[1]: systemd 29 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT +LIBCRYPTSETUP; mandriva)
NET: Registered protocol family 10
<30>systemd[1]: Set hostname to .
<28>systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
<27>systemd[1]: [/etc/rc.d/init.d/iptables:18] Failed to add LSB Provides name firewall.service, ignoring: File exists
<30>udevd[517]: starting version 168
EXT4-fs (sda3): re-mounted. Opts: (null)
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:73
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:76
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:77
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:78
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:79
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:80
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:81
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:82
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:83
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:84
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:85
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:86
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:87
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:88
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:89
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:90
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:91
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:92
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:93
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:94
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:95
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:96
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:97
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:98
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:99
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:100
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:101
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:105
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:106
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:107
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:108
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:109
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:110
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:111
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:112
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:113
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:114
<27>udevd[517]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:115
<27>udevd[517]: NAME="%k" is ignored, because it breaks kernel supplied names, please remove it from /etc/udev/rules.d/51-hso-udev.rules:124
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
sr 4:0:0:0: Attached scsi generic sg2 type 5
sr 5:0:0:0: Attached scsi generic sg3 type 5
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
EDAC MC: Ver: 2.1.0 May 22 2011
EDAC amd64_edac: v3.3.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
NV_TCO: NV TCO WatchDog Timer Driver v0.01
NV_TCO: Watchdog reboot not detected.
NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=1)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
ACPI: acpi_idle registered with cpuidle
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
ACPI: resource nForce2_smbus [io 0x1c40-0x1c7f] conflicts with ACPI region SM00 [io 0x1c40-0x1c45]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
IT8716 SuperIO detected.
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
ppdev: user-space parallel port driver
cfg80211: Calling CRDA to update world regulatory domain
<14>mtp-probe[931]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:02.0/usb1/1-4"
<14>mtp-probe[928]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:02.0/usb1/1-6"
<14>mtp-probe[951]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:02.0/usb1/1-5"
<14>mtp-probe[931]: bus: 1, device: 2 was not an MTP device
<14>mtp-probe[1328]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:02.0/usb1/1-4"
<14>mtp-probe[951]: bus: 1, device: 3 was not an MTP device
<14>mtp-probe[1328]: bus: 1, device: 2 was not an MTP device
<14>mtp-probe[1330]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:02.0/usb1/1-5"
<14>mtp-probe[1330]: bus: 1, device: 3 was not an MTP device
<14>mtp-probe[928]: bus: 1, device: 4 was not an MTP device
<14>mtp-probe[1366]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:02.0/usb1/1-6"
<14>mtp-probe[1366]: bus: 1, device: 4 was not an MTP device
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ICE1712 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
rt61pci 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt61pci-phy0::radio
Registered led device: rt61pci-phy0::assoc
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Adding 9213240k swap on /dev/sda5. Priority:0 extents:1 across:9213240k
<30>systemd-fsck[1521]: /dev/sda6: clean, 19065/25650000 files, 12505891/102400000 blocks
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
<27>systemd-tmpfiles[1636]: [/usr/lib/tmpfiles.d/legacy.conf:22] Unknown group 'lock'.
<29>systemd[1]: systemd-tmpfiles-setup.service: main process exited, code=exited, status=1
<29>systemd[1]: Unit systemd-tmpfiles-setup.service entered failed state.
<30>acpid[4212]: starting up with proc fs
<30>acpid[4212]: 2 rules loaded
<30>acpid[4212]: waiting for events: event logging is off
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
/dev/vmmon[4443]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[4443]: Initial HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0
/dev/vmmon[4443]: HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0
/dev/vmmon[4443]: Module vmmon: initialized
[4454]: VMCI: shared components initialized.
[4454]: VMCI: host components initialized.
[4454]: VMCI: Module registered (name=vmci,major=10,minor=57).
[4454]: VMCI: Using host personality
[4454]: VMCI: Module (name=vmci) is initialized
fuse init (API version 7.16)
/dev/vmnet: open called by PID 4594 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4598 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4580 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: device is wireless, enabling SMAC
bridge-wlan0: up
ADDRCONF(NETDEV_UP): wlan0: link is not ready
bridge-wlan0: attached
bridge-wlan0: disabling the bridge
bridge-wlan0: down
bridge-wlan0: detached
forcedeth 0000:00:08.0: irq 41 for MSI/MSI-X
/dev/vmnet: open called by PID 4608 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
/dev/vmnet: open called by PID 4620 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
NET: Registered protocol family 17
/dev/vmnet: open called by PID 4625 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
/dev/vmnet: open called by PID 4580 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
userif-3: sent link down event.
userif-3: sent link up event.
userif-3: sent link down event.
userif-3: sent link up event.
vmnet1: no IPv6 routers present
eth0: no IPv6 routers present
vmnet8: no IPv6 routers present
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
pci 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (e0000000 1000000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
radeon 0000:02:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (R520 0x1002:0x7109).
[drm] register mmio base: 0xFDDF0000
[drm] register mmio size: 65536
ATOM BIOS: R520
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:02:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: irq 42 for MSI/MSI-X
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 2029366 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 4 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x00040000).
radeon 0000:02:00.0: WB enabled
[drm] Loading R500 Microcode
[drm] radeon: ring at 0x0000000020001000
[drm] ring test succeeded in 2 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
failed to evaluate ATIF got AE_BAD_PARAMETER
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I
[drm] HPD2
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP3: INTERNAL_LVTM1
[drm] Connector 1:
[drm] S-video
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] DFP1: INTERNAL_KLDSCP_TMDS1
[drm] Possible lm64 thermal controller at 0x18
[drm] fb mappable at 0xE00C0000
[drm] vram apper at 0xE0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.8.0 20080528 for 0000:02:00.0 on minor 0
ata1.00: configured for UDMA/133
ata1: EH complete
ata3.00: configured for UDMA/133
ata3: EH complete
EXT4-fs (sda3): re-mounted. Opts: commit=0
EXT4-fs (sda6): re-mounted. Opts: commit=0
dolphin[17865] general protection ip:7f70792b0f80 sp:7fff9e67bbe8 error:0 in libpsync.so.1.0.0[7f70792af000+4000]
usb 2-1: new high speed USB device using ehci_hcd and address 5
usb 2-1: New USB device found, idVendor=eb1a, idProduct=2881
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB 2881 Video
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
Linux video capture interface: v2.00
IR JVC protocol handler initialized
em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
IR Sony protocol handler initialized
em28xx #0: chip ID is em2882/em2883
lirc_dev: IR Remote Control driver registered, major 251
IR LIRC bridge handler initialized
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20
em28xx #0: EEPROM info:
em28xx #0: AC97 audio (5 sample rates)
em28xx #0: USB Remote wakeup capable
em28xx #0: 500mA max power
em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
em28xx #0: Your board has no unique USB ID.
em28xx #0: A hint were successfully done, based on eeprom hash.
em28xx #0: This method is not 100% failproof.
em28xx #0: If the board were missdetected, please email this log to:
em28xx #0: V4L Mailing List
em28xx #0: Board detected as Pinnacle Hybrid Pro
em28xx #0: Identified as Pinnacle Hybrid Pro (card=53)
tvp5150 6-005c: chip found @ 0xb8 (em28xx #0)
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
tuner 6-0061: chip found @ 0xc2 (em28xx #0)
xc2028 6-0061: creating new instance
xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner
xc2028 6-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
xc2028 6-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 6-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 6-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
em28xx #0: Config register raw data: 0x58
em28xx #0: AC97 vendor ID = 0xffffffff
em28xx #0: AC97 features = 0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
tvp5150 6-005c: tvp5150am1 detected.
em28xx #0: v4l2 driver version 0.1.2
xc2028 6-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
(0), id 00000000000000ff:
xc2028 6-0061: Loading firmware for type=(0), id 0000000100000007.
xc2028 6-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
em28xx #0: V4L2 video device registered as video0
em28xx #0: V4L2 VBI device registered as vbi0
em28xx audio device (eb1a:2881): interface 1, class 1
em28xx audio device (eb1a:2881): interface 2, class 1
usbcore: registered new interface driver em28xx
em28xx driver loaded
usbcore: registered new interface driver snd-usb-audio
tvp5150 6-005c: tvp5150am1 detected.
xc2028 6-0061: attaching existing instance
xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner
em28xx #0: em28xx #0/2: xc3028 attached
DVB: registering new adapter (em28xx #0)
DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
em28xx #0: Successfully loaded em28xx-dvb
Em28xx: Initialized (Em28xx dvb Extension) extension
tvp5150 6-005c: tvp5150am1 detected.
[root@localhost ~]#