Ciao

Il post che ho inviato poco fa non è andato a buon fine. Ci riprovo.

Ho installato drakwizard come mi hai suggerito ed ho trovato l'ASSISTENTE.

(per il momento preferisco le interfacce grafiche in quanto ho da poco abbandonato gates e MANRIVA mi sta dando ottime soddisfazioni)

Ma veniamo a noi:
Ho un vecchio P1 MMX con lan integrata (con funzione PXE) che vorrei usare come terminale . Ma dopo diversi tentativi di configurare,sul server, DHCP e LTSP quando tento la connessione coò terminale mi da questo esito:

1) avvio PXE: FALLISCE

2) avvio da floppy con etherboot MAC 00:80:5F:E3:5B:EF NON TROVA IP

I 2 PC sono collegati con cavo incrociato

Questo è il file DHCPD.conf:

Quote:

# for explanation in french go to : http://www.delafond.org/traducmanfr/man/man5/dhcpd.conf.5.html
ddns-update-style none;
allow booting;
allow bootp;

# Your dhcp server is not master on your network !
#not authoritative;
# Your dhcpd server is master on your network !
authoritative;
#not authoritative;

#Interface where dhcpd is active
DHCPD_INTERFACE = "eth0";

# Definition of PXE-specific options
# Code 1: Multicast IP address of bootfile
# Code 2: UDP port that client should monitor for MTFTP responses
# Code 3: UDP port that MTFTP servers are using to listen for MTFTP requests
# Code 4: Number of secondes a client must listen for activity before trying
# to start a new MTFTP transfer
# Code 5: Number of secondes a client must listen before trying to restart
# a MTFTP transfer

# define Option for the PXE class
option space PXE;
option PXE.mtftp-ip code 1 = ip-address;
option PXE.mtftp-cport code 2 = unsigned integer 16;
option PXE.mtftp-sport code 3 = unsigned integer 16;
option PXE.mtftp-tmout code 4 = unsigned integer 8;
option PXE.mtftp-delay code 5 = unsigned integer 8;
option PXE.discovery-control code 6 = unsigned integer 8;
option PXE.discovery-mcast-addr code 7 = ip-address;

#Define options for pxelinux
option space pxelinux;
option pxelinux.magic code 208 = string;
option pxelinux.configfile code 209 = text;
option pxelinux.pathprefix code 210 = text;
option pxelinux.reboottime code 211 = unsigned integer 32;
site-option-space "pxelinux";
# These lines should be customized to your setup
#option pxelinux.configfile "configs/common";
#option pxelinux.pathprefix "/pxelinux/files/";
#filename "/pxelinux/pxelinux.bin";

option pxelinux.magic f1:00:74:7e;
option pxelinux.reboottime 30;
#if exists dhcp-parameter-request-list {
# Always send the PXELINUX options
# append dhcp-parameter-request-list 208, 209, 210, 211;
# append dhcp-parameter-request-list 208,211;
# }

#Class that determine the options for Etherboot 5.x requests
class "Etherboot" {

#if The vendor-class-identifier equal Etherboot-5.0
match if substring (option vendor-class-identifier, 0, 9) = "Etherboot";

# filename define the file retrieve by the client, there nbgrub
# our tftp is chrooted so is just the path to the file
filename "/etherboot/nbgrub";

#Used by etherboot to detect a valid pxe dhcp server
option vendor-encapsulated-options 3c:09:45:74:68:65:72:62:6f:6f:74:ff;

# Set the "vendor-class-identifier" field to "PXEClient" in dhcp answer
# if this field is not set the pxe client will ignore the answer !
option vendor-class-identifier "Etherboot";

vendor-option-space PXE;
option PXE.mtftp-ip 0.0.0.0;

# IP of you TFTP server
next-server 172.16.65.1;
}

# create the Class PXE
class "PXE" {
# if the "vendor-class-identifier" is set to "PXEClient" in the client dhcp request
match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";

# filename define the file retrieve by the client, there pxelinux.0
# our tftp is chrooted so is just the path to the file
# If you prefer use grub, use pxegrub compiled for your ethernet card.
#filename "/PXEClient/pxegrub";
filename "/X86PC/linux/linux.0";

# Set the "vendor-class-identifier" field to "PXEClient" in dhcp answer
# if this field is not set the pxe client will ignore the answer !
option vendor-class-identifier "PXEClient";

vendor-option-space PXE;
option PXE.mtftp-ip 0.0.0.0;

# IP of you TFTP server
next-server 172.16.65.1;
}

# the class know exist just for deny the response to other DHCP request
class "known" {
match hardware;
one-lease-per-client on;
ddns-updates on;
ddns-domainname = "";
option domain-name "";
option domain-name-servers 172.16.65.1;
ddns-hostname = pick-first-value(ddns-hostname, option host-name);
option fqdn.no-client-update on;
set vendor_class_identifier = option vendor-class-identifier;
}

# TAG: COMPUTER_LIST_BEGIN
#host compute9{
# hardware ethernet 00:02:b3:3f:7e:b7;
# fixed-address compute9;
# TAG: COMPUTER_LIST_END

# subnet 192.168.200.0 netmask 255.255.255.0 {
subnet 172.16.65.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option routers 169.254.0.1;
default-lease-time 28800;
max-lease-time 86400;
option domain-name "";
option domain-name-servers 172.16.65.1;
next-server 172.16.65.1;

pool {
range 169.254.247.5 169.254.247.;
# deny members of "PXE";
# deny members of "Etherboot";
}

# pool {
# range 192.168.200.200 192.168.200.254;
# give an address of the the pool for PXE client and deny the other
#allow members of "PXE";
#deny members of "known";
#allow members of "Etherboot";
# }
}

Grazie per l'aiuto ciao ciao

mirtos

Ciao

Molto probabilmente hai ragione.

Che alternative ho?

ciao ciao

mirtos